Jensen Interceptor Upgrades

Please Note: This is an upgrade over a standard oil filter. Supplied in orange as per original. This oil filter also contains an additional valve to prevent flow back

Please State Vehicle Model And Engine (440 or 383) When Ordering.

Click here to view or download the fitting instructions.

Please Note:

Must be purchased with EDL1478 - Edelbrock electric choke kit and EDL1481 - Edelbrock throttle lever adaptor

If fitting to a standard intake manifold, you must also purchase either EDL2691 - Adaptor plate or EDL2191 - Edelbrock 440ci intake manifold

Not suitable for SP cars

Please Note: Must also purchase EDL1481 - Edelbrock throttle lever adaptor

Sold Individually 

Please Note:

Cylinder Head Includes Valves & Springs.

Cylinder Head Does Require The Following:

Head Bolt Kit EDL8591 Or 1453606

Spark Plugs RC12YC x8

Only Suitable For 440 Engines

Edelbrock electric chokes kit are designed to give you reliable starting in all weather conditions. The kit include all necessary parts to convert your carburettor from manual to electic choke operation

Please Note: Required for most Interceptors when fitting a replacement Edelbrock Carburettor

Must Also Purchase EDL1205 - Connection For Breather Pipe

Exhaust Transfer Pipe Is Blocked To Enable A Cooler Intake Manifold.

Outlet On Right Hand Side

Outlet On Left Hand Side

Oil Adaptor Plate from Original Pump is required to fit this Oil Pump

BRAND NEW UNIT

IDLE: 69Amp

CRUISE: 78Amp

MAX: 90Amp

BRAND NEW UNIT

IDLE: 69Amp

CRUISE: 78Amp

MAX: 90Amp

Round Back Alternator

Please Note: Made in Japan. Fits All V8 engines.

These Fit Original Front Vented Discs. This Caliper Kit Will Fit Standard 15" GKN Road Wheels.

Various Colours Available - Please State Colour When Ordering

Stainless Steel Grade = 304 - High Quality. 

Sold Individually. Only Suitable For V8 Engines. Must Also Purchase 52335/P 

Please Note: Suitable for vehicles fitted with stainless steel headers - 52335 (see related parts).

These are not suitable for Jensen FF cars. You will have to get the primary pipes specially made by an exhaust specialist.

A ready to install aluminium fuel tank that facilitates the fitting of a fuel injection pump - 52256 and cylinder float sender unit - CT6501T. The fuel pump and float are not included with this fuel tank (shown in images for illustration purposes only)

See related parts for fuel injection pump and float sender unit

To fit with CT4858AL/INJECT fuel tank.

Features include:

• 340 Stealth fuel pump
• Supports 700 horsepower EFI forced induction, 825 horsepower EFI naturally aspirated
• Supports 900 horsepower carbureted forced induction, 1,000 horsepower carbureted naturally aspirated
• Black anodized hanger assembly
• Fuel resistant baffle/basket
• Universal high flow pre-pump filter
• Modular design allows fitment to almost any fuel tank
• Must be used with a return style fuel system
• In tank use only

• Flow Rate: 90 gph/340 lph

• Fuel Pressure: 90 psi

Suitable For J & Series 4 Cars

This Radiator Is Built To The Same Dimensions As The Original So The Cooling Capacity Is The Same As The Original Too. Our Aluminium Radiators Are Fully Tig Welded And Offer An extra 40% Better Cooling Over The Original Radiators. This Is Achieved By The Following:

- There Are More Water Tubes In Airflow Which Helps Dissipate Heat

- The Fins Louvres On Aluminium Capture More Air Which Also Helps Dissipate The Heat

- The Light Weight Construction Also Does Not Hold Heat Like The Original Copper And Brass Unit.

Suitable For G & H Series Cars, SP Cars.

This Radiator Is Built To The Same Dimensions As The Original So The Cooling Capacity Is The Same As The Original Too. Our Aluminium Radiators Are Fully Tig Welded And Offer An extra 40% Better Cooling Over The Original Radiators. This Is Achieved By The Following:

- There Are More Water Tubes In Airflow Which Helps Dissipate Heat

- The Fins Louvres On Aluminium Capture More Air Which Also Helps Dissipate The Heat

- The Light Weight Construction Also Does Not Hold Heat Like The Original Copper And Brass Unit.

Please Note:

Only Suitable With Aluminium Radiator Part Number CT5924AL

It Is Recommended To Use Fan Motor Loom & Relay Part Number 847008L As The Fan Motors Have A Higher Amps Output

It is recommended to use with 847008L fan motor loom/relay as the fans have higher amps output.

Please Note:

This Fan Motor & Blade Is Not Suitable For Cars With Triple Fan Setup Due To Blade Having A Larger Diameter of 11 Inch

For MkII Cars: Only Suitable For Later Cars With A Fan Cowl Mounted To The Radiator.

NOT Sutable for Tube Style Mounted Across The Inner Wings.

** Must Be Purchased along With Loom Part Number: 847008L **