Jaguar E-Type Floor Panels and Assemblies

Full Floor Half Assembly LH for E-Type Series 1 & 2

£521.26 Ex. VAT
Privilege Card Price: £469.13 

Part No: MRE14/15LH

Part Type: Martin Robey Engineering Product – Made in England

Not in Stock - Available to Backorder

New to our floor assembly range, Built in-house at Martin Robey this full-floor and Inner sill assembly allows for an easy repair to your E-Type Floor. Please note that this assembly comes with the radius arm cup and the side frame lower mounting already fixed in place.

We also offer variations of the floor assembly which are less or more comprehensive depending on the scale of your E-Type repair or restoration. Please see Alternative parts for more information on these products.

Full Floor Half Assembly RH for E-Type Series 1 & 2

£521.26 Ex. VAT
Privilege Card Price: £469.13 

Part No: MRE14/15RH

Part Type: Martin Robey Engineering Product – Made in England

Not in Stock - Available to Backorder

New to our floor assembly range, Built in-house at Martin Robey this full-floor and Inner sill assembly allows for an easy repair to your E-Type Floor. Please note that this assembly comes with the radius arm cup and the side frame lower mounting already fixed in place.

We also offer variations of the floor assembly which are less or more comprehensive depending on the scale of your E-Type repair or restoration. Please see Alternative parts for more information on these products.

Jaguar E-Type Series 1 3.8 Full Floor Assembly - Flat Floor

£5528.91 Ex. VAT
Privilege Card Price: £4976.02 

Part No: FLOOR38FT

Part Type: Martin Robey Engineering Product – Made in England

Not in Stock - Available to Backorder

Assembly breakdown:

 

1 MRE10LH Side Frame Lower Mounting Bracket LH for SWB E-Type
1 MRE10RH Side Frame Lower Mounting Bracket RH for SWB E-Type
1 MRE115 Tunnel Stiffener Under Centre Floor for SWB E-Type
1 MRE14ALH Full Flat Floor LH for E-Type Series 1 3.8L
1 MRE14ARH Full Flat Floor RH for E-Type Series 1 3.8L
1 MRE15LH Inner Sill Panel LH For E-Type Series 1 and 2 SWB
1 MRE15RH Inner Sill Panel RH For E-Type Series 1 and 2 SWB
1 MRE24A Full Floor Crossmember - Square Style for 3.8L E-Type
1 MRE57 Upper Floor Assembly for Series 1 3.8 Flat Floor E-Type /XKE
1 MRE59LH Upper Floor Stiffener Bracket LH for Series 1 & 2 Excl. 2+2
1 MRE59RH Upper Floor Stiffener Bracket RH for Series 1 & 2 Excl. 2+2
1 MRE60 Gearbox Tunnel Assembly for Jaguar SWB E-Type Series 1 & 2
1 MRE61A Top Panel Above Rear Suspension for Series 1 3.8 E-Type
1 MRE62 Panel Assembly Front of Boot Floor for Series 1 3.8 XKE
1 MRE63 Crossmember Panel Assembly Rear of Floor for Series 1&2 XKE
1 MRE72LH Chassis Leg with Bump Stop Bracket Left Hand for SWB E-Type
1 MRE72RH Chassis Leg with Bump Stop Bracket Right Hand for SWB E-Type
2 MRE73A Radius Arm Mounting Cup for All Jaguar E-Type
SPECIAL ORDER ONLY, MANUFACTURED TO ORDER.

Jaguar E-Type Series 1 3.8 Full Floor Assembly - Welled

£4908.66 Ex. VAT
Privilege Card Price: £4417.79 

Part No: FLOOR38

Part Type: Martin Robey Engineering Product – Made in England

Low Stock - Order Now!

Assembly breakdown: 

1 X MRE10LH SIDE FRAME LOWER MOUNTING BRACKET LH (2 PIECES)
1 X MRE10RH SIDE FRAME LOWER MOUNTING BRACKET RH (2 PIECES)
1 X MRE115 TUNNEL STIFFENER
1 X MRE14LH FULL LENGTH FLOOR LH S1E S2E
1 X MRE14RH FULL LENGTH FLOOR RH S1E S2E
1 X MRE15LH INNER SILL PANEL LH S1E S2E SWB
1 X MRE15RH INNER SILL PANEL RH S1E S2E SWB
1 X MRE24A FULL SQUARE SECTION (CROSSMEMBER TO FLOOR) 3.8
1 X MRE58 UPPER FLOOR ASSEMBLY S1E S2E WELLED FLOOR
1 X MRE59LH UPPER FLOOR STIFFENER BRACKET LH S1E S2E EXCEPT 2+2
1 X MRE59RH UPPER FLOOR STIFFENER BRACKET RH S1E S2E EXCEPT 2+2
1 X MRE60 TUNNEL ASSEMBLY S1E S2E EXCEPT 2+2
1 X MRE61A TOP PANEL ABOVE REAR SUSPENSION S1E 3.8
1 X MRE62 PANEL TO BOOT FLOOR S1E 3.8 (2 PIECES)
1 X MRE63 PANEL ASSY TO REAR OF FLOOR S1E S2E (INCLUDES 2X MRE21)
1 X MRE72LH CHASSIS LEG WITH BUMP STOP BRACKET LH
1 X MRE72RH CHASSIS LEG WITH BUMP STOP BRACKET RH
2 X MRE73A RADIUS ARM MOUNTING CUP

Jaguar E-Type Series 1 & 2 4.2 Full Floor Assembly - Welled

£4908.66 Ex. VAT
Privilege Card Price: £4417.79 

Part No: FLOOR42

Part Type: Martin Robey Engineering Product – Made in England

Not in Stock - Available to Backorder

Assembly breakdown:

1 X MRE10LH SIDE FRAME LOWER MOUNTING BRACKET LH (2 PIECES)
1 X MRE10RH SIDE FRAME LOWER MOUNTING BRACKET RH (2 PIECES)
1 X MRE115 TUNNEL STIFFENER
1 X MRE14LH FULL LENGTH FLOOR LH S1E S2E
1 X MRE14RH FULL LENGTH FLOOR RH S1E S2E
1 X MRE15LH INNER SILL PANEL LH S1E S2E SWB
1 X MRE15RH INNER SILL PANEL RH S1E S2E SWB
1 X MRE25A CROSSMEMBER TO FLOOR SLANT SECTION (FULL) ALL 4.2
1 X MRE58 UPPER FLOOR ASSEMBLY S1E S2E WELLED FLOOR
1 X MRE59LH UPPER FLOOR STIFFENER BRACKET LH S1E S2E EXCEPT 2+2
1 X MRE59RH UPPER FLOOR STIFFENER BRACKET RH S1E S2E EXCEPT 2+2
1 X MRE60 TUNNEL ASSEMBLY S1E S2E EXCEPT 2+2
1 X MRE61 TOP PANEL ABOVE REAR SUSPENSION S1E S2E 4.2 DHC FHC
1 X MRE62 PANEL TO BOOT FLOOR S1E 3.8 (2 PIECES)
1 X MRE63 PANEL ASSY TO REAR OF FLOOR S1E S2E (INCLUDES 2X MRE21)
1 X MRE72LH CHASSIS LEG WITH BUMP STOP BRACKET LH
1 X MRE72RH CHASSIS LEG WITH BUMP STOP BRACKET RH
2 X MRE73A RADIUS ARM MOUNTING CUP

Flat Floor Assembly for Jaguar E-Type Series 1 3.8

£2751.37 Ex. VAT
Privilege Card Price: £2476.23 

Part No: BD15171

Part Type: Martin Robey Engineering Product – Made in England

Low Stock - Order Now!

Assembly breakdown:

1 X MRE14ALH FULL FLOOR LH (FLAT FLOOR)
1 X MRE14ARH FULL FLOOR RH (FLAT FLOOR)
1 X MRE10LH SIDE FRAME LOWER MOUNTING BRACKET LH (2 PIECES)
1 X MRE10RH SIDE FRAME LOWER MOUNTING BRACKET RH (2 PIECES)
1 X MRE15LH INNER SILL PANEL LH S1E S2E SWB
1 X MRE15RH INNER SILL PANEL RH S1E S2E SWB
1 X MRE24A FULL SQUARE SECTION (CROSSMEMBER TO FLOOR) 3.8
2 X MRE73A RADIUS ARM MOUNTING CUP
1 X MRE115 TUNNEL STIFFENER

Welled Floor Assembly for Jaguar E-Type Series 1 3.8 / XKE

£2310.70 Ex. VAT
Privilege Card Price: £2079.63 

Part No: BD22819

Part Type: Martin Robey Engineering Product – Made in England

Not in Stock - Available to Backorder

Assembly breakdown:

1 X MRE14LH FULL LENGTH FLOOR LH S1E S2E
1 X MRE14RH FULL LENGTH FLOOR RH S1E S2E
1 X MRE10LH SIDE FRAME LOWER MOUNTING BRACKET LH (2 PIECES)
1 X MRE10RH SIDE FRAME LOWER MOUNTING BRACKET RH (2 PIECES)
1 X MRE15LH INNER SILL PANEL LH S1E S2E SWB
1 X MRE15RH INNER SILL PANEL RH S1E S2E SWB
1 X MRE24A FULL SQUARE SECTION (CROSSMEMBER TO FLOOR) 3.8
2 X MRE73A RADIUS ARM MOUNTING CUP
1 X MRE115 TUNNEL STIFFENER

Floor Assembly - Welled for Jaguar E-Type Series 1 & 2 4.2

£2310.70 Ex. VAT
Privilege Card Price: £2079.63 

Part No: BD27374

Part Type: Martin Robey Engineering Product – Made in England

In Stock

A floor assembly for a series 1 or 2 Jaguar E-Type (Later style) with a slanted/angled floor cross member. We also offer a more extensive floor assembly which includes the tunnel, rear upper floor assembly, chassis legs etc. Click here for more information on 'FLOOR42' complete floor assembly. 

Genuine Classic Jaguar Part Number - BD27374

Assembly breakdown:

1 X MRE14LH Full Floor LH For E-Type Series 1 and 2 SWB
1 X MRE14RH Full Floor RH For E-Type Series 1 and 2 SWB
1 X MRE10LH Side Frame Lower Mounting Bracket LH for E-Type
1 X MRE10RH Side Frame Lower Mounting Bracket RH for E-Type
1 X MRE15LH Inner Sill Panel LH For E-Type Series 1 and 2 SWB
1 X MRE15RH Inner Sill Panel RH For E-Type Series 1 and 2 SWB
1 X MRE25A CROSSMEMBER TO FLOOR SLANT SECTION (FULL) ALL 4.2
2 X MRE73A RADIUS ARM MOUNTING CUP
1 X MRE115 Tunnel Stiffener Under Centre Floor for SWB E-Type

Full Floor Panel LH with Radius Arm Cup for E-Type 1 & 2

£320.24 Ex. VAT
Privilege Card Price: £288.22 

Part No: MRE14/73ALH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

A Complete Left-Hand Floor Assembly for Jaguar E-Type Series 1 & 2 'Welled Floor' style short-wheelbase models. This Floor is supplied with the Radius Arm Cup Riveted to the Floor already, we recommend this due to a special Riveter required to fit the Rivet and Collar (BD20958/9) to the Floor. These rivets can be seen in the close-up underside picture of the floor. Please see Alternative Parts for more information on other similar products available.

If you are doing extensive work to the floor of your Jaguar E-Type, we would recommend a complete floor assembly which includes the Floors, Inner Sills, Crossmember, Radius Arm Cups, Side Frame Lower Mountings and Tunnel Stiffener as a complete pre-built unit. Please see alternative parts for more information on the different floor assembly units available.

All of our floors are manufactured in-house at Martin Robey Group within the United Kingdom. 

Full Floor Panel RH with Radius Arm Cup for E-Type 1 & 2

£320.35 Ex. VAT
Privilege Card Price: £288.32 

Part No: MRE14/73ARH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

A Complete Right-Hand Floor Assembly for Jaguar E-Type Series 1 & 2 'Welled Floor' style short-wheelbase models. This Floor is supplied with the Radius Arm Cup Riveted to the Floor already, we recommend this due to a special Riveter required to fit the Rivet and Collar (BD20958/9) to the Floor. These rivets can be seen in the close-up underside picture of the floor. Please see Alternative Parts for more information on other similar products available.

If you are doing extensive work to the floor of your Jaguar E-Type, we would recommend a complete floor assembly which includes the Floors, Inner Sills, Crossmember, Radius Arm Cups, Side Frame Lower Mountings and Tunnel Stiffener as a complete pre-built unit. Please see alternative parts for more information on the different floor assembly units available.

All of our floors are manufactured in-house at Martin Robey Group within the United Kingdom. 

Full Floor LH For E-Type Series 1 and 2 SWB

£268.03 Ex. VAT
Privilege Card Price: £241.23 

Part No: MRE14LH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

A Complete Left-Hand Floor Assembly for Jaguar E-Type Series 1 & 2 'Welled Floor' style short-wheelbase models. The Floor Assembly is supplied without the Radius Arm Cup Riveted to the Floor. We recommend the Floor with the Cups fitted due to a special Riveter required to fit the Rivet and Collar (BD20958/9) to the Floor. 

If you are doing extensive work to the floor of your Jaguar E-Type, we would recommend a complete floor assembly which includes the Floors, Inner Sills, Crossmember, Radius Arm Cups, Side Frame Lower Mountings and Tunnel Stiffener as a complete pre-built unit. Please see alternative parts for more information on the different floor assembly units available.

All of our floors are manufactured in-house at Martin Robey Group within the United Kingdom. 

Full Floor RH For E-Type Series 1 and 2 SWB

£268.03 Ex. VAT
Privilege Card Price: £241.23 

Part No: MRE14RH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

A Complete Right-Hand Floor Assembly for Jaguar E-Type Series 1 & 2 'Welled Floor' style short-wheelbase models. This Floor is supplied without the Radius Arm Cup Riveted to the Floor. We recommend the Floor with the Cups fitted due to a special Riveter required to fit the Rivet and Collar (BD20958/9) to the Floor. See Alternative Parts for more information on these products.

If you are doing extensive work to the floor of your Jaguar E-Type, we would recommend a complete floor assembly which includes the Floors, Inner Sills, Crossmember, Radius Arm Cups, Side Frame Lower Mountings and Tunnel Stiffener as a complete pre-built unit. Please see alternative parts for more information on the different floor assembly units available.

All of our floors are manufactured in-house at Martin Robey Group within the United Kingdom. 

Full Flat Floor LH with Radius Arm Cup for E-Type Series 1

£567.17 Ex. VAT
Privilege Card Price: £510.45 

Part No: MRE14A/73ALH

Part Type: Martin Robey Engineering Product – Made in England

Not in Stock - Available to Backorder

Full Flat Floor RH with Radius Arm Cup for E-Type Series 1

£567.17 Ex. VAT
Privilege Card Price: £510.45 

Part No: MRE14A/73ARH

Part Type: Martin Robey Engineering Product – Made in England

Not in Stock - Available to Backorder

Full Flat Floor LH for E-Type Series 1 3.8L

£473.37 Ex. VAT
Privilege Card Price: £426.03 

Part No: MRE14ALH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

A complete floor assembly for Jaguar E-Type Series 1 3.8 Litre - 'Flat Floor' style. This Floor Assembly does not come fitted with the Radius Arm Cups (MRE73A). We would recommend purchasing the Floor with the Radius Arm cups due to them being a type of Rivet and Collar that requires a special Riveter to be fitted. See alternative parts for more information.

Full Flat Floor RH for E-Type Series 1 3.8L

£473.37 Ex. VAT
Privilege Card Price: £426.03 

Part No: MRE14ARH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

A complete floor assembly for Jaguar E-Type Series 1 3.8 Litre - 'Flat Floor' style. This Floor Assembly does not come fitted with the Radius Arm Cups (MRE73A). We would recommend purchasing the Floor with the Radius Arm cups due to them being a type of Rivet and Collar that requires a special Riveter to be fitted. See alternative parts for more information.

Full Floor LH With Radius Arm Cup For E-Type Series 3

£352.00 Ex. VAT
Privilege Card Price: £316.80 

Part No: MRE14C/73ALH

Part Type: Martin Robey Engineering Product – Made in England

Low Stock - Order Now!

Full Floor RH With Radius Arm Cup For E-Type Series 3

£352.00 Ex. VAT
Privilege Card Price: £316.80 

Part No: MRE14C/73ARH

Part Type: Martin Robey Engineering Product – Made in England

Low Stock - Order Now!

Full Floor LH For E-Type Series 3

£315.37 Ex. VAT
Privilege Card Price: £283.83 

Part No: MRE14CLH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

Full Floor RH For E-Type Series 3

£315.37 Ex. VAT
Privilege Card Price: £283.83 

Part No: MRE14CRH

Part Type: Martin Robey Engineering Product – Made in England

Not in Stock - Available to Backorder

Full Floor LH with Radius Arm Cup For E-Type Series 1/2 2+2

£352.00 Ex. VAT
Privilege Card Price: £316.80 

Part No: MRE14B/73ALH

Part Type: Martin Robey Engineering Product – Made in England

Low Stock - Order Now!

Full Floor RH with Radius Arm Cup For E-Type Series 1/2 2+2

£352.00 Ex. VAT
Privilege Card Price: £316.80 

Part No: MRE14B/73ARH

Part Type: Martin Robey Engineering Product – Made in England

Low Stock - Order Now!

Full Floor LH For E-Type Series 1 & 2 2+2 Only

£315.37 Ex. VAT
Privilege Card Price: £283.83 

Part No: MRE14BLH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

Full Floor RH For E-Type Series 1 & 2 2+2 Only

£315.37 Ex. VAT
Privilege Card Price: £283.83 

Part No: MRE14BRH

Part Type: Martin Robey Engineering Product – Made in England

In Stock

Enquire Now

Your local spares specialists for all Jaguar and Jensens, wherever you are in the world...