Fuel System

Now Manufactured in-house at Martin Robey Group in the United Kingdom from High-Quality Brass.

Supplied with Copper Washer & Setscrew.

NEW PRODUCT 2023

Now Manufactured in-house at Martin Robey Group in the United Kingdom from High-Quality Brass.

Supplied with Copper Washer & Setscrew.

NEW PRODUCT 2023

Vehicle Application:

• E-Type - All Models
• MK II / MK2
• 420 Saloon
• S-Type 3.4 / 3.8
• MKX / MK 10
• Daimler 2.5 V8 / V8 250
• Daimler Hearse
• Daimler Limousine
• Daimler Sovereign

Single-ended points type Pump i.e. it retains the contact breaker points as per the original design. We do offer the same pump but with more modern solid-state electronics under part number AZX1308EN.

Now Dual Polarity. High pressure 12 Volt with a minimum flow of 15 gallons per hour.

AZX1300 Series

The AZX 1300 series pump is a high capacity adaptation of the AUF 200/1200, the pump body having been redesigned to incorporate a flow-smoothing unit and an air bottle.

The flow-smoothing unit consists of a diaphragm and housing situated above the delivery chamber and outlet passage. Fuel pressure pulsations are damped by the air contained in the housing, resulting in a reduction of flow pressure variations and an increase in output for a given rate of operation.

A large compartment formed in the inlet side of the pump acts as an air cushion and smoothes the pressure pulsations of the incoming fuel; it also prevents high negative pressure being created in the pump body.

Special features:

The features are similar to those of the AUF 200/AZX 1200 type, plus:

1. High output
2. Flow-smoothing on inlet and outlet

AZX1200 Series Type Features:

1. Freedom of installation:
2. Compact dimensions
3. Self-contained unit
4. Adjustable connections
5. Rapid priming of float-chamber
6. Excellent vapour handling capacity
7. Twin tungsten contact breaker points

Single-ended Electronic type Pump. Looks exactly like the original but has more modern solid-state electronics rather than the contact breaker points of the original design. We do offer the same pump but with contact breaker points under part number AZX1308#.

Negative earth. High pressure 12 Volt with a minimum flow of 15 gallons per hour. boot mounted.

AZX1300 Series

The AZX 1300 series pump is a high capacity adaptation of the AUF 200/1200, the pump body having been redesigned to incorporate a flow-smoothing unit and an air bottle.

The flow-smoothing unit consists of a diaphragm and housing situated above the delivery chamber and outlet passage. Fuel pressure pulsations are damped by the air contained in the housing, resulting in a reduction of flow pressure variations and an increase in output for a given rate of operation.

A large compartment formed in the inlet side of the pump acts as an air cushion and smoothes the pressure pulsations of the incoming fuel; it also prevents high negative pressure being created in the pump body.

Special features:

The features are similar to those of the AUF 200/AZX 1200 type, plus:

1. High output
2. Flow-smoothing on inlet and outlet

AZX1200 Series Type Features:

1. Freedom of installation:
2. Compact dimensions
3. Self-contained unit
4. Adjustable connections
5. Rapid priming of float-chamber
6. Excellent vapour handling capacity
7. Twin tungsten contact breaker points

Single-ended electronic type pump. Manufactured in Germany by Hardi and has a two-year guarantee. Looks similar to the original but has more modern solid-state electronics rather than the contact breaker points of the original design. Direct replacement for the original.

Will work with negative or positive earth vehicles (for positive earth vehicles the positive terminal must be connected to the chassis and negative terminal connected to the ignition fed supply). 

Please Note:

For Jensen Interceptor models - These studs are used for the oil filter mounting adaptor