Aluminium / Cast Iron Brake Caliper Kits from Fosseway & BCC

The ultimate in big brake upgrades for all Series 1 E Types*. UK designed and manufactured kit containing everything required (except brake fluid) to convert your vehicle to 294mm two-piece discs with six piston aluminium calipers giving a massive increase in braking performance over the original set up. This kit is bolt on, there is no drilling or other modification required to your vehicle meaning it can be returned to standard in future should you ever wish to**. 

The kit includes:

• Anodised lightweight six piston calipers
• 294mm brake discs
• Set of uprated EBC Green Stuff brake pads 
• Anodised lightweight caliper mounting hardware
• Anodised lightweight brake disc mounting bells
• Stainless steel braided brake hoses
• Caliper mounting hardware and alignment shims
• Comprehensive installation instructions.

Calipers are supplied in Silver as standard but can be ordered in Black if required - please specify when you order. 

This kit will work in tandem with the standard rear brakes but for the ultimate in overall braking performance please see Related Parts for associated rear brake upgrade kits.

*Please note that this kit will fit under 15 inch diameter wheels but a minimum wheel width of 6 inches is required.

**On cars fitted with brake dust shields it will likely be necessary to trim these back to clear the new calipers or just remove them.

A significant rear brake upgrade for all models of E Type, Series 1 to 3*. UK designed and manufactured kit containing everything required (except brake fluid) to convert your vehicle to lightweight aluminium four piston calipers giving a massive increase in braking performance over the original set up. This kit retains the standard non-vented rear brake discs - please see Related Parts for the vented rear disc kit.

Importantly the kit includes a totally new handbrake mechanism/caliper thereby eliminating the original hard to access, hard to adjust original set-up. The new handbrake mechanism has been positioned to ease pad changes and incorporates a handbrake compensator which is easy to adjust. The standard handbrake cable is utilised to facilitate ease of fitting and operation. Furthermore the kit incorporates a remote brake bleeding kit which moves the bleed nipples from the centre of the car to a much more accessible location.

This kit is bolt on, there is no drilling or other modification required to your vehicle meaning it can be returned to standard in future should you ever wish to. 

The kit includes:

• 4 piston anodised aluminium brake calipers
• EBC brake pads
• New handbrake compensator and cables
• Remote rear mounted handbrake calipers
• Stainless steel braided brake hoses
• Integrated remote bleed kit

Calipers are supplied in Silver as standard but can be ordered in Black if required - please specify when you order. 

*For Series 1 cars this kit should be combined with upgraded front brakes - please see Related Parts.

The ultimate in rear brake upgrade for all models of E Type, Series 1 to 3*. UK designed and manufactured kit containing everything required (except brake fluid) to convert your vehicle to lightweight aluminium four piston calipers combibed with vented rear brake discs giving a massive increase in braking performance over the original set up. Please see Related Parts for the non-vented rear disc kit.

Importantly the kit includes a totally new handbrake mechanism/caliper thereby eliminating the original hard to access, hard to adjust original set-up. The new handbrake mechanism has been positioned to ease pad changes and incorporates a handbrake compensator which is easy to adjust. The standard handbrake cable is utilised to facilitate ease of fitting and operation. Furthermore the kit incorporates a remote brake bleeding kit which moves the bleed nipples from the centre of the car to a much more accessible location.

This kit is bolt on, there is no drilling or other modification required to your vehicle meaning it can be returned to standard in future should you ever wish to. 

The kit includes:

• 4 piston anodised aluminium brake calipers
• EBC brake pads
• Vented rear brake discs
• New handbrake compensator and cables
• Remote rear mounted handbrake calipers
• Stainless steel braided brake hoses
• Integrated remote bleed kit

Calipers are supplied in Silver as standard but can be ordered in Black if required - please specify when you order. Please also specify which model of E Type you have (late 3.8 or 4.2)**

*For Series 1 cars this kit should be combined with upgraded front brakes - please see Related Parts.

**Please also note this kit will not fit early 3.8 Series 1 cars where the original brake caliper bolts directly to the differential casing without a bracket inbetween the two parts. In this case please see brake kit FBK2 under Alternative Parts.

The ultimate in big brake upgrades for all Series 3 E Types. UK designed and manufactured kit containing everything required (except brake fluid) to convert your vehicle to 302mm* two-piece discs with six piston aluminium calipers giving a massive increase in braking performance over the original set up. This kit is bolt on, there is no drilling or other modification required to your vehicle meaning it can be returned to standard in future should you ever wish to**. 

The kit includes:

• Anodised lightweight six piston calipers
• 302mm brake discs*
• Set of uprated EBC Green Stuff brake pads 
• Anodised lightweight caliper mounting hardware
• Anodised lightweight brake disc mounting bells
• Stainless steel braided brake hoses
• Caliper mounting hardware and alignment shims
• Comprehensive installation instructions.

Calipers are supplied in Silver as standard but can be ordered in Black if required - please specify when you order. 

This kit will work in tandem with the standard rear brakes but for the ultimate in overall braking performance please see Related Parts for associated rear brake upgrade kits.

*302mm discs require 15" or larger wire wheels or 16" wheels of any type. If you have 15" steel wheels we will need to supply 294 mm discs (kit is the same price).

**On cars fitted with brake dust shields it will likely be necessary to trim these back to clear the new calipers or just remove them.

The ultimate in big brake upgrades for all Series 2 E Types*. UK designed and manufactured kit containing everything required (except brake fluid) to convert your vehicle to 294mm two-piece discs with six piston aluminium calipers giving a massive increase in braking performance over the original set up. This kit is bolt on, there is no drilling or other modification required to your vehicle meaning it can be returned to standard in future should you ever wish to**. 

The kit includes:

• Anodised lightweight six piston calipers
• 294mm brake discs
• Set of uprated EBC Green Stuff brake pads 
• Anodised lightweight caliper mounting hardware
• Anodised lightweight brake disc mounting bells
• Stainless steel braided brake hoses
• Caliper mounting hardware and alignment shims
• Comprehensive installation instructions.

Calipers are supplied in Silver as standard but can be ordered in Black if required - please specify when you order. 

This kit will work in tandem with the standard rear brakes but for the ultimate in overall braking performance please see Related Parts for associated rear brake upgrade kits.

*Please note that this kit will fit under 15 inch diameter wheels but a minimum wheel width of 6 inches is required.

**On cars fitted with brake dust shields it will likely be necessary to trim these back to clear the new calipers or just remove them.

A significant rear brake upgrade for all models of E Type, Series 1 to 3*. UK designed and manufactured kit containing everything required (except brake fluid) to convert your vehicle to lightweight aluminium four piston calipers giving a massive increase in braking performance over the original set up. This kit retains the standard non-vented rear brake discs - please see Related Parts for the vented rear disc kit.

Importantly the kit includes a totally new handbrake mechanism/caliper thereby eliminating the original hard to access, hard to adjust original set-up. The new handbrake mechanism has been positioned to ease pad changes and incorporates a handbrake compensator which is easy to adjust. The standard handbrake cable is utilised to facilitate ease of fitting and operation. Furthermore the kit incorporates a remote brake bleeding kit which moves the bleed nipples from the centre of the car to a much more accessible location.

This kit is bolt on, there is no drilling or other modification required to your vehicle meaning it can be returned to standard in future should you ever wish to. 

The kit includes:

• 4 piston anodised aluminium brake calipers
• EBC brake pads
• New handbrake compensator and cables
• Remote rear mounted handbrake calipers
• Stainless steel braided brake hoses
• Integrated remote bleed kit

Calipers are supplied in Silver as standard but can be ordered in Black if required - please specify when you order. 

*For Series 1 cars this kit should be combined with upgraded front brakes - please see Related Parts.

A significant rear brake upgrade for all models of E Type, Series 1 to 3. UK designed and manufactured kit containing everything required (except brake fluid) to convert your vehicle to lightweight aluminium four piston calipers giving a massive increase in braking performance over the original set up. This kit retains the standard non-vented rear brake discs - please see Related Parts for the vented rear disc kit.

Importantly the kit includes a totally new handbrake mechanism/caliper thereby eliminating the original hard to access, hard to adjust original set-up. The new handbrake mechanism has been positioned to ease pad changes and incorporates a handbrake compensator which is easy to adjust. The standard handbrake cable is utilised to facilitate ease of fitting and operation. Furthermore the kit incorporates a remote brake bleeding kit which moves the bleed nipples from the centre of the car to a much more accessible location.

This kit is bolt on, there is no drilling or other modification required to your vehicle meaning it can be returned to standard in future should you ever wish to. 

The kit includes:

• 4 piston anodised aluminium brake calipers
• EBC brake pads
• New handbrake compensator and cables
• Remote rear mounted handbrake calipers
• Stainless steel braided brake hoses
• Integrated remote bleed kit

Calipers are supplied in Silver as standard but can be ordered in Black if required - please specify when you order. 

The ultimate in rear brake upgrade for all models of E Type, Series 1 to 3*. UK designed and manufactured kit containing everything required (except brake fluid) to convert your vehicle to lightweight aluminium four piston calipers combibed with vented rear brake discs giving a massive increase in braking performance over the original set up. Please see Related Parts for the non-vented rear disc kit.

Importantly the kit includes a totally new handbrake mechanism/caliper thereby eliminating the original hard to access, hard to adjust original set-up. The new handbrake mechanism has been positioned to ease pad changes and incorporates a handbrake compensator which is easy to adjust. The standard handbrake cable is utilised to facilitate ease of fitting and operation. Furthermore the kit incorporates a remote brake bleeding kit which moves the bleed nipples from the centre of the car to a much more accessible location.

This kit is bolt on, there is no drilling or other modification required to your vehicle meaning it can be returned to standard in future should you ever wish to. 

The kit includes:

• 4 piston anodised aluminium brake calipers
• EBC brake pads
• Vented rear brake discs
• New handbrake compensator and cables
• Remote rear mounted handbrake calipers
• Stainless steel braided brake hoses
• Integrated remote bleed kit

Calipers are supplied in Silver as standard but can be ordered in Black if required - please specify when you order. 

Complete kit to convert early 3.8 E Type* to Fosseway's massively improved handbrake set-up. The benefits of the kit are:

• Massively improved access to the handbrake mechanism
• Much more reliable in performance
• Ease of installation, no drilling or other alterations are required and the kit mates up to the existing handbrake lever and cable
• Ease of adjustment when required.

The kit includes everything you need to convert an otherwise standard car including:

• Aluminium handbrake calipers including pads - these are supplied in Silver as standard but can be ordered in Black if required
• New compensator mechanism including cables
• All necessary brackets and fittings etc.

*Early cars (up to late 1963) can be identified as having the main rear brake calipers bolted directly to the differential. See Alternative Parts for later vehicles.

Complete kit to convert late 3.8* and all Series 1 4.2 E Type to Fosseway's hugely improved handbrake set-up. The benefits of the kit are:

• Massively improved access to the handbrake mechanism
• Much more reliable in performance
• Ease of installation, no drilling or other alterations are required and the kit mates up to the existing handbrake lever and cable
• Ease of adjustment when required.

The kit includes everything you need to convert an otherwise standard car including:

• Aluminium handbrake calipers including pads - these are supplied in Silver as standard but can be ordered in Black if required
• New compensator mechanism including cables
• All necessary brackets and fittings etc.

*Later 3.8 cars (post late 1963) can be identified as having brackets between the main rear brake calipers and the differential. See Alternative Parts for earlier vehicles.

Complete kit to convert all Series 2 & 3 E Type / Series 1 to 3 XJ / all XJS with inboard rear brakes to Fosseway's massively improved handbrake set-up. The benefits of the kit are:

• Massively improved access to the handbrake mechanism
• Much more reliable in performance
• Ease of installation, no drilling or other alterations are required and the kit mates up to the existing handbrake lever and cable
• Ease of adjustment when required.

The kit includes everything you need to convert an otherwise standard car including:

• Aluminium handbrake calipers including pads - these are supplied in Silver as standard but can be ordered in Black if required
• New compensator mechanism including cables
• All necessary brackets and fittings etc.

Application- E-type S1/XK150/MK2/240/340/MK1/S-Type*

COMPLETE KIT TO CONVERT THE FRONT BRAKES TO 4 PISTON CALIPERS OFFERING SIGNIFICANTLY IMPROVED BRAKING EFFICIENCY AND FEEL. THIS KIT IS DESIGNED TO RETAIN THE STANDARD BRAKE DISCS.

THESE KITS ARE UK DESIGNED AND MANUFACTURED AND CONTAIN EVERYTHING YOU NEED TO UNDERTAKE THE CONVERSION. THESE ARE BOLT-ON PARTS I.E. NO DRILLING ETC. IS REQUIRED**.

*WHEN USED FOR S-TYPE THIS KIT IS SUITABLE FOR VEHICLES UPTO CHASSIS NUMBERS:

• 1B9190 - RHD 3.4
• 1B26306 - LHD 3.4
• 1B59652 - RHD 3.8
• 1B80375 - LHD 3.8

FOR LATER CARS USE KIT BCC/2ALVENT

**On cars fitted with brake dust shields it will likely be necessary to trim these back to clear the new calipers or just remove them.

Brake Discs Included.

Vehicle Application: E-type S1/S1.5/XK150/MK2/240/340/MK1/S-Type*

COMPLETE KIT TO CONVERT THE FRONT BRAKES TO 4 PISTON ALUMINIUM CALIPERS WITH VENTED BRAKE DISCS OFFERING SIGNIFICANTLY IMPROVED BRAKING EFFICIENCY AND FEEL.

THESE KITS ARE UK DESIGNED AND MANUFACTURED AND CONTAIN EVERYTHING YOU NEED TO UNDERTAKE THE CONVERSION. THESE ARE BOLT-ON PARTS I.E. NO DRILLING ETC. IS REQUIRED**.

*WHEN USED FOR S-TYPE THIS KIT IS SUITABLE FOR VEHICLES UPTO CHASSIS NUMBERS:

• 1B9190 - RHD 3.4
• 1B26306 - LHD 3.4
• 1B59652 - RHD 3.8
• 1B80375 - LHD 3.8

FOR LATER CARS USE KIT BCC/2ALVENT

Features:

• Caliper Material: Aluminium - 7075-T651
• Caliper Plating: Aluminium - Type III Anodised. This ensures for a hard-wearing corrosion-resistant finish
• Pistons: Made at BCC from 303 Stainless Steel ensuring long life and increased durability.
• Seals: Provided by British manufacturers of OEM automotive hydraulic seals.
• Bolts: Aluminium - Made from high grade 316 HiMo Stainless Steel certified to grade 10.9.
• Brake Lines: Copper/Nickel alloy hard lines with brass fittings.
• Brake Pads: EBC Ultimax 2 Pads
• Pipe unions are imperial threaded a
• All calipers are engraved with a batch number with full traceability.

**On cars fitted with brake dust shields it will likely be necessary to trim these back to clear the new calipers or just remove them.

Brake Discs Included.

Application- E-type S1/S1.5/XK150/MK2/240/340/MK1/S-Type*

COMPLETE KIT TO CONVERT THE FRONT BRAKES TO 4 PISTON CALIPERS WITH VENTED BRAKE DISCS OFFERING SIGNIFICANTLY IMPROVED BRAKING EFFICIENCY AND FEEL.

THESE KITS ARE UK DESIGNED AND MANUFACTURED AND CONTAIN EVERYTHING YOU NEED TO UNDERTAKE THE CONVERSION. THESE ARE BOLT-ON PARTS I.E. NO DRILLING ETC. IS REQUIRED**.

*WHEN USED FOR S-TYPE THIS KIT IS SUITABLE FOR VEHICLES UPTO CHASSIS NUMBERS:

• 1B9190 - RHD 3.4
• 1B26306 - LHD 3.4
• 1B59652 - RHD 3.8
• 1B80375 - LHD 3.8

FOR LATER CARS USE KIT BCC/2ALVENT

**On cars fitted with brake dust shields it will likely be necessary to trim these back to clear the new calipers or just remove them.

COMPLETE KIT TO CONVERT THE FRONT BRAKES TO 4 PISTON ALUMINIUM CALIPERS OFFERING SIGNIFICANTLY IMPROVED BRAKING EFFICIENCY AND FEEL. THIS KIT IS DESIGNED TO RETAIN THE STANDARD BRAKE DISCS.

THESE KITS ARE UK DESIGNED AND MANUFACTURED AND CONTAIN EVERYTHING YOU NEED TO UNDERTAKE THE CONVERSION. THESE ARE BOLT-ON PARTS I.E. NO DRILLING ETC. IS REQUIRED**.

WHEN USED FOR S-TYPE THIS KIT IS SUITABLE FOR VEHICLES UPTO CHASSIS NUMBERS:

• 1B9190 - RHD 3.4
• 1B26306 - LHD 3.4
• 1B59652 - RHD 3.8
• 1B80375 - LHD 3.8

FOR LATER CARS USE KIT BCC/2ALVENT

**On cars fitted with brake dust shields it will likely be necessary to trim these back to clear the new calipers or just remove them.